Theatre-solution Prima C3-W Manuel d'utilisateur télécharger pdf (Page 2)

Prima C3-W Specifications – Theatre Seating

Page 2 of 4

3. Veneer leg panels with integrated hardwood armrest

Model noted is based on the Theatre Solutions, Inc. Prima “C3-W” model with the intent of establishing the

high level of quality required for the project. Other brands submitted for approval will be given

consideration provided that a full seating mock-up, along with a complete list of specification discrepancies

between the proposed substitution and the product specified is received at least 10 working days prior to

the bid date.

By offering a quote for this project, the bidder assumes full responsibility for complying with the

specifications for this project and shall be totally responsible for any expenses incurred if the

product quoted does not comply with the specifications.

Failure to comply with the warranty described in Part 4 of these specifications will be cause for

disqualification.

2.2 MATERIALS

Padding material shall be flexible polyurethane foam which conforms to the standards of the California

Bureau of Home Furnishings 117-75. The back shall be 2” thick. The seat shall be 3” thick.

Seating fabric shall be _______________________________________________ with the color to be

selected from the standard choice of colors. All upholstery shall be first quality without creases, stretch

lines, or wrinkles.

Exposed wood on the leg panels shall be veneer. The panel edges shall be stained to match the veneer

faces. All wood shall be stained to match the architect’s sample.

2.3 FABRICATION, GENERAL

Fabricate the theater seating in contoured form for maximum comfort using materials that are carefully

selected to be free from defects, objectionable projections, or irregularities. Smooth round corners and

edges to present the least possible snagging and pinching hazards.

2.4 MOUNTING

Fabricate seating units for floor attachment, using leg panels that have been manufactured to conform to

the slope of the floor while maintaining seat and back in same angular relationship to leg panels

throughout.

2.5 VENEER LEG PANELS

ll leg panels shall be constructed of two layers of 1” thick 45-50 lb. density particleboard which are glued

and machined to form one integral 2” thick panel. Center leg panels shall include two mounting plates of

11 gauge cold-rolled steel containing four 1/4-20 rivet nuts. These mounting plates will be embedded

between the two layers of particleboard and attached with four #10 x 5/8” pan head sheet metal screws.

End leg panels shall contain one interior mounting plate. These mounting plates provide the structure for

the hinge assemblies.

Center leg panels shall include two hinge assemblies consisting of a 5/16” x 3” x 3” hot-rolled pickled-in-oil

steel plate with one 1/2” diameter 12L14 steel stop pin and one 3/4” machined hinge pin of 12L14 steel.

The pin bar weldment is finished with a black epoxy powder coating and assembled to the leg panel with

four 1/4-20 flat head machine screws. End leg panels shall contain one hinge assembly.

Veneer leg panels shall be finished with Grade A venee

on both sides, centered across the width of the

panel. The vertical edges shall be banded with 1/8” hardwood of the same species as the veneer. An

integral armrest along the top of the leg panel shall be hardwood to match the veneer face, shall be

nominally 2-7/16” x 2-1/16” and shall be profile shaped to a 36” radius.

ll leg panels shall include a plinth base of seasoned maple hardwood fitted with 1/4-20 threaded inserts

for assembly of floor attachment hardware.

2.6 UPHOLSTERED SEATS/BACKS

General: Fabricate theater seating with padding and fabric covering. Equip each seat with a gravity self-

rising mechanism so that unoccupied seats return to an upright position perpendicular to the base line of

floor of auditorium. Spring compensating mechanism will not be acceptable. Chair profile with the seat in

the upright position cannot exceed 20-1/4”.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Theatre-solution Prima C3-W Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Theatre-solution Prima C3-W