Theatre-solution Jury Base Seating Manuel d'utilisateur télécharger pdf (Page 60)

Jury Base Seating Specifications 59

Jury Base Seating Specifications

(This section pertains to the Teatro Jury Base Seating model.)

PART 2 – PRODUCTS

2.1 SEATING

Provide from Theatre Solutions, Inc., 121 Park Avenue, Quakertown, PA 18951, the Teatro Jury Base

Seating as follows:

1. Basic floor-mounted Jury Base Forum chair.

Model noted is based on the Theatre Solutions, Inc. Teatro Jury Base Seating with the intent of

establishing the high level of quality required for the project. Other brands submitted for approval will be

given consideration provided that a full seating mock-up, along with a complete list of specification

discrepancies between the proposed substitution and the product specified is received at least 10 working

days prior to the bid date.

By offering a quote for this project, the bidder assumes full responsibility for complying with the

specifications for this project and shall be totally responsible for any expenses incurred if the

product quoted does not comply with the specifications.

Failure to comply with the warranty described in Part 4 of these specifications will be cause for

disqualification.

2.2 MATERIALS

Padding material shall be flame retardant polyurethane foam which conforms to the standards of the

California Bureau of Home Furnishings 117-75.

Seating fabric shall be _______________________________________________ with the color to be

selected from the standard choice of colors. All upholstery shall be first quality without creases, stretch

lines, or wrinkles.

2.3 FABRICATION, GENERAL

Fabricate the seating for maximum comfort using materials that are carefully selected to be free from

defects, objectionable projections, or irregularities. Smooth round corners and edges to present the least

possible snagging and pinching hazards.

2.4 MOUNTING

The floor base shall be cast aluminum with a durable powder-coated finish. The base shall include four

countersunk holes equally spaced around the perimeter of the base for mounting to the floor with 1/4” flat

head screws, providing a flush, unobtrusive appearance.

2.5 CHAIRS

Chair shall be TSI model Teatro.

Frame Assembly: Shall consist of two legs, two armrest support plates, one base plate, and one wedge box

all welded into one integral structure upon which the seat, back, and armrests are assembled. The legs

shall be laser-profiled 5/16” thick hot-rolled steel plate upon which there is an 11 gauge armrest support

plate. The wedge box shall be formed from 11 gauge hot-rolled pickled-in-oil steel. The entire welded

assembly shall be powder-coated.

Seat Construction: The seat panel shall be 5/8” thick, electronically glued curved hardwood plywood. The

padding material shall be 3” thick polyurethane foam, shall be glued to the inner surface of the seat panel,

and shall conform to the California Bureau of Home Furnishings Technical Bulletin 117. The seat shall be

attached to the frame assembly with (4) 1/4-20 x 1” pan head machine screws and split lock washers.

Back Construction: The back panel shall be 3/8” thick, electronically glued curved hardwood plywood. The

padding material shall be 1-3/4” thick, 2-3/4” thick in the lumbar region, shall be glued to the inner surface

of the back panel, and shall conform to the California Bureau of Home Furnishings Technical Bulletin 117.

The outside surface of the back panel shall be encapsulated in 1/4” thick slab polyurethane foam. The

back shall be attached to the frame assembly using (2) 1/4-20 x 3/4” flat head machine screws and (2)

3/8-16 x 1-1/4” flat head machine screws.

rmrests: Shall be kiln-dried hardwood, nominally 1” thick x 2-1/2” wide x 11-3/4” long. Each armrest will

be fastened to the frame assembly with (4) #8 x 5/8” pan head sheet metal screws.

F. The chair shall be equipped with a non-tilt mechanism.

G. The chair shall be equipped with a swivel and return cylinder.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 72 73

Commentaires sur ces manuels

Pas de commentaire

Theatre-solution Jury Base Seating Manuel d'utilisateur Page 60

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Theatre-solution Jury Base Seating